A must-read for cosmetics professionals

The dispensers are divided into two types: the screw-top type and the screw-top type. In terms of function, they are further classified into spray, foundation cream, emulsion pump, aerosol valve and vacuum bottle

2. The size of the pump head is determined by the diameter of the bottle. The spray specification is 12.5mm - 24mm, and the water output is 0.1ml - 0.2ml per time. It is generally used on the packaging of products such as perfume and gel water. The length of the connecting pipe with the same diameter can be determined according to the height of the bottle.

3. The emulsion pump has a wide range of specifications from 16ml to 38ml, with a water output of 0.28ml/ time to 3.1ml/ time. It is generally used for cream and washing products.

4. Special distributors such as foam pump heads and hand-held nozzles. The foam pump head is a non-air-filling hand-held pressure pump head that does not require air filling to generate foam. Just a light press can produce a certain amount of high-quality foam. It is generally equipped with a dedicated bottle. Hand-held nozzles are typically used on products such as cleaning agents.

5. The composition of the distributor is rather complex and generally includes: dust cover, push head, push rod, gasket, piston, spring, valve, bottle cap, pump body, suction pipe, and valve balls (including steel balls and glass balls). The bottle caps and dust covers can be made in color, electroplated or covered with electroplated aluminum rings. Due to the large number of molds involved in a set of pump heads and the large order quantity, the minimum order quantity is 10,000 to 20,000. The supply period is 15 to 20 days after sample confirmation. White and general-purpose types are always in stock.

6. Vacuum bottles are usually cylindrical in shape, with specifications ranging from 15ml to 50ml, and some even have 100ml. Their overall capacity is relatively small. They operate based on the principle of atmospheric pressure, which can prevent cosmetics from being contaminated during use. Vacuum bottles are made of aluminum foil, plastic electroplating, and colored plastic. Their prices are higher than those of other common containers, and the general order quantity requirements are not high.

7. Very few customers of the distributor make their own molds. If they want more molds, they have to pay more and the cost is relatively high.